Easyrig Vario 5 (Serene & Stabil 2 Arms available)

Camera Support / Grip

Specifications (no arm):

Load Range: 5-17 kg (11-38 lbs)
Weight: 5.5 kg (12 lbs)
Suspension line length: 90 cm (35”) when fully stretched.
Mounted Height: 103-113 cm (40.5-44.5”)
Folded Height: 62 cm (24.4”)
Mounted Width: 80-130 cm (31-51”)
Folded Width: 34 cm (13.3”)
Mounted Depth: 31cm (12.2”)
Folded Depth: 22 cm (8.6”)
Vest Size: Cinema Standard (80-130CM – 31-51″)

The Easyrig Vario 5 is a versatile, all-round solution no matter what setup you have. One adjustable Easyrig to fit your needs. Since its release in 2015 the Easyrig Vario 5 has become an extremely popular Easyrig. It has an adjustable weight range; by adjusting the tension with the provided allen key, the Easyrig Vario 5 can be tuned to match your exact camera setup ranging from 5-17 kg (11-38 lbs) & 10-25 kg (22-55 lbs). It fits all cameras; the Easyrig Vario 5 can be attached to any camera as long as it has a camera handle due to our easy-to-use camera hook. Can come fitted with an additional Flowcine Serene Arm or an Easyrig Stabil 2 Arm. Details below.

Flowcine Serene Arm:
The Flowcine Serene Arm is a two-axis spring arm that attaches at the end of the Easyrig (2/2.5/3 or Vario 5) arm. It stabilises vibrations and motion errors on the vertical axis that comes from walking or running with the rig. It also stabilises side to side errors in the same scenarios by counter pivoting around it’s centre axis. At the same time you have full use of the Easyrig cord extension that will allow you to go from high to low mode while at the same time the Serene will take care of the vertical and side to side stabilisation adding two more stabilised axis to your existing system. The Serene Arm can take camera setups between 6-19.5 kg, and you can easily fine tune the spring tension without tool.

Easyrig Stabil 2 Arm:
The Stabil 2 Arm was developed to support gimbals between 2-7kg (4.4-15.4 lbs). It will help stabilize hand held shots to a certain degree while protecting your back. This enables you to operate the gimbal and camera for much longer periods of time. The design is based on the original Stabil Arm and has the ability to lock the arm so it functions as a standard Minimax.

Related Kit